America vs. Drugs, Crime

The United States is a bureaucracy built by the people for the people. As a nation, we have established hundreds of organizations to deal with different problems and epidemics that may arise within our country. While every agency may have a different mission, they are all geared toward the betterment of American’s quality of life. Three of the biggest national problems our government faces are drugs, crime and immigration. Each one requires a different approach, strategy and the attention of local, state or federal level government.The war on drugs has been an arduous, long fought battle, that doesn’t necessarily have a way to be won. There are many agencies in place to combat drug peddlers, some of these include: the DEA (Drug Enforcement Agency) FBI (Federal Bureau of Investigation) ATF (Bureau of Alcohol Tobacco Firearm and Explosives) and even the FDA (Federal Drug Administration). Annually, the United State spends over $51,000,000,000 on the war on drugs. Tax reven ue that drug legalization would yield annually, if currently-illegal drugs were taxed at rates comparable to those on alcohol and tobacco: $46.7 billion. D. Baum, author of â€Å"Smoke and Mirrors: War on Drugs and The Politics of the Failure† claims that after â€Å"4 decades of punitive policies, illicit drugs are more easily obtained, drug potencies are greater, and drug barons are richer than ever. † (1997) This war costs more than any other agency, and sometimes costs more than some agencies combined. While local government agencies try to fight with this war as best as they can, they do not have the resources or manpower to keep up with the costs of stopping said crimes.It is unfortunate because the drug war affects local business to the point that inflation, high insurance premiums, and less travelers become a factor and negatively impact the area. While Federal Agencies are better suited to deal with the Drug War, Local Agencies have been more efficient in comb atting general crime. Local Governments tend to understand their demographics more thoroughly, so they can make better use of their funds. Most, if not all, funding for law enforcement comes from grants or tax revenues.Effective crime prevention in high-violence, high-risk neighborhoods begins with the interdependence of local agencies. These agencies need the ability to invest in the neighborhoods to prevent crime rates from rising. The most effective place to start is with children and their education; NCPC (National Crime Prevention Council) is an organization that’s mission it is to educate students and prevent crime. Illegal Immigration is the third problem facing our nation.Like the above-mentioned epidemics, Immigration has federal agencies to prevent this. While there is no concrete solution to this problem, steps are being taken to fix the issue. Whether it is the e-verify program, or a fence to keep illegal aliens out, agencies are constantly trying to come with new solutions. The issue is so complex and difficult, that even the President is threatening to use an executive order to reform the U. S Immigration system. Also because of the complexity of this issue, Federal Agencies such as I. C.E (Immigration and Customs Enforcement) CBP (Customs Border Patrol) Department of Labor or Homeland security offer the best solutions. Local Government usually don’t have the personnel to deal with immigration, as would a Federal Agency such as I. C. E, who have trained agents who specialize in that line of duty, and when faced with danger, know exactly how to carry out orders. All in all, Federal Agencies are usually more inclined to deal with our nation’s problems. It is important to never consolidate the agencies, so that each department can provide the best quality of service.There will always be negative issues that jeopardize our freedom, but how we deal with them is what makes this nation so great. Bibliography Lawrence, S. , & Godfrey , D. (2004, March 2). PREVENTING CRIME: WHAT WORKS, WHAT DOESN'T, WHAT'S PROMISING1. . Retrieved June 29, 2014, from https://www. ncjrs. gov/works/wholedoc. htm Sterling, E. (2013, July 1). Eleven Ways the War on Drugs is Hurting Your Business. . Retrieved June 28, 2014, from http://www. cjpf. org/11ways Drug War Statisitc. (n. d. ). . Retrieved June 29, 2014, from http://www. drugpolicy. org/drug-war-statistics

Ap Psych Free Response Essay

As the Smith-Garcias are planning for their baby, they have to decide which principles from each of the theories they have researched that they will practice. The first of these theories is Skinner’s Operant Conditioning in which an element of reinforcement and punishment is utilized to shape the child’s social and behavioral skills. It will be the parent’s job to reinforce wanted behavior and punish unwanted behavior. For example, if the child throws a temper tantrum, her parents might put her in time out to show that this type of behavior is not acceptable. The punishment therefore reinforces that if she acts this way again, she knows she will be placed in time out. Essentially the child learns from these reinforcements and punishments. The second principle is Bandura’s social learning theory which deals with vicarious reinforcement and vicarious punishment. Essentially the child will learn by observing others and is not affected directly. Bandura believed that direct reinforcement could not account for all types of learning which explains why his theory is rooted in the idea of observation. Overall There are three core concepts at the heart of social learning theory. First is the idea that people can learn through observation. Next is the idea that internal mental states are an essential part of this process. Finally, this theory recognizes that just because something has been learned, it does not mean that it will result in a change in behavior. To illustrate Bandura’s theory in their parenting style, the Smith-Garcia’s might provide a model for sharing or even increase sharing through vicarious reinforcement. The third theory they have studied is Ainsworth’s attachment research in which he addresses the idea of secure attachment, insecure attachment, and other such ideals. The idea is that securely attached children are more likely to perceive their primary caregiver as a secure base. This is illustrated in the fact that once this child is born, she will feel an emotional security and attachment to her parents who are her primary caregiver. She will feel most comfortable around them. An example of this would be if they were to promote secure attachment to increase self reliance. These behaviors may include nurturing, support, encouragement, and many more. The fourth and final theory they will address and practice is Baumrind’s research on parenting styles. In Baumrind’s research, he

The Role of Money in a Relationship Among the Couples

Opinion essay The role of money in a relationship among the couples, who are going to marry Outline: I. Introduction Money is everything. Money represents power, love, joy, and much more. II. Main body: a) The relationship between couples is great because they have money b) Money sometimes can be a disaster, because of its lack c) Money influence on people’s power III. Conclusion Money is very important thing in people’s lives. Without money they are not able to live†¦ Money is everything in people’s life. Money is not simply money. Money represents power, love, joy, and much more.The Kazakhs believe that money plays an important role in their life. No one cannot achieve anything in life without money. The role of money in a relationship is very important to the success or failure of a relationship. There a few reasons of that. First, the relationship between couples is great because they have money. For example, two persons meet; both of them have money, jo bs, and apartments. They enjoy each other’s company, with places where they go, interests and etc. By the way, if one of them doesn’t havet money or job they will not pay attention to her or him.Then the couple establishes a life together, gets married, has children, enjoy with their lives. In short, they are happy, because they have money. Second, money sometimes can be a disaster, because of its lack. We always witness many endings of relationships with the reason of money. For example, one of the partners loses his or her job. After a few months the fighting starts. It starts with little arguments about bills and conflicts are every day. Then the fights grow and it is constant. They understand that all these problems are because of money’s lack. It can take a happy couple straight to divorce.Finally, money influences on people’s power. Usually, men earn more money, than women and they have more power in families. However, many women work as men and hav e good salaries today in Kazakhstan. And they feel freer to make decisions about what the couple does with money. One partner think that saving money for the future is most important, while the other partner think that they should spend money immediately. And the partner, who earns less money, feels humiliation from another. He or she thinks that it is beneath them. Therefore, the problems start again.To conclude, money is very important thing in people’s lives. Without money they are not able to live. If they would be able to live without the money, why do they work, what for? I don’t believe that some people work only for their pleasure. And I think that having a good financial standing is the only way to avoid the stress factors that can destroy people’s relationship. Also most couples, when they decide to marry they take no notice for money. But I think that the best time for couples to begin discussing money is before the wedding, so both know what the othe r expects and how they will spend their money.Without having an understanding about each other's attitude and emotions towards finances, saving, investment and spending, people might be setting themself up for failure in their relationship. Reference list: * Laura Frangipani (April 05, 2008) http://www. helium. com/items/975446-the-role-of-money-in-a-relationship. Helium . * Sissy R. Osteen, Ph. D. (Assistant Professor), Rachel A. Neal, Ph. D. (Visiting Assistant Professor) http://agecon. okstate. edu/annie/files/T-4201web. pdf. Oklahoma Cooperative Extension Service. * Joanna Moorhead (September 7th 2008) http://moreintelligentlife. com/story/couples-money. More Intelligent Life.

Functional Relationships Assignment Example | Topics and Well Written Essays - 500 words

Functional Relationships - Assignment Example Therefore production function interlink inputs and outputs as in the case provided. Taking for example the industrial production of sugar at a sugar mill. For production of sugar several inputs are required for production process to be complete. Although there are many inputs from labor, fuel, sugarcane supply, water and machinery the main inputs are sugarcane supply. To produce output y, input x1 and x2 are required for it to be produced. Therefore, such input set has the following effects on production of y. x is the sum input x1 and x2 referred to as the isoquant. Consider a situation where there are two main inputs x1 and x2 for production of sugar. Let x1 be sugarcane supply and x2 be labor. All these inputs work together for production of sugar. For Y quantity of sugar to be produced the firm need to use x1 quantity of sugarcane and x2 labor in the firm. Therefore, production process requires different inputs put together to produce a given output required. Inputs such as labor, capital and raw materials are equally important in the production process. In conclusion, addition of extra inputs in production clearly has great impact in production process. Production functions are determined by inputs that are used. Such inputs for example labor, capital and raw materials are used in the production process to determine the amount of outputs in

Law for Business Case Study Example | Topics and Well Written Essays - 1250 words

Law for Business - Case Study Example Finally in respect of creditors of the company the court held the no duty was owed to them. The approach had been criticized by many and had been thought to be unjustified as it was thought that reliance would be placed on the accounts of the company which is indeed due to the auditors’ manuals and other material. However, in favour of the decision a few other points for such a decision are the floodgates argument; the lack of proximity between an auditor and an investor also leads to the conclusion that no claim lies against the auditors; and the placing of undue burden on the auditors and therefore duty is only limited to the company.. (Deakin et al 2008) Another important aspect that was considered in the decision of Caparo for accountants liability as well the standard duty of care requirement was the fact that the three tier test was required to be satisfied so as establish a duty of care. This test was a reformed test for negligence.The first requirement for the establis hment of duty of care was that it must be reasonably foreseeable that the conduct of defendant would cause damage to the claimant. Secondly, there must be sufficient proximity between the parties and finally ‘the situation must be one in which the court considers it fair, just and reasonable the law should impose a duty of care of a given scope on the one party for the benefir of the other’. (Elliott et al 2007) Another important aspect that had been considered by the House of Lords have held in La Banque Financiere de la Cite v Westgate Insurance Co Ltd was that if there had been an omission to speak it would not lead to construing of liability. A further important authority in respect of negligent misstatement is that of Hedley Byrne v. Heller2 wherein it was construed by the courts that there was no negligent misstatement on the basis that the facts portrayed that there had been disclaimer within the remarks that is the use of the term without responsibility which le d to the possibility of a duty of care to be extinguished. There had been a controversial decision of Royal Bank of Scotland plc v Bannerman Johnstone Maclay, wherein the absence of the disclaimer of liability was considered to be pivotal so as to establish a duty of care and holding the auditors liable. The facts of the case were that BJM were auditors of APC Ltd and RBS was the principal lender of APC Ltd and due to such lending RBS had an equity interest in APC. One of the requirement of RBS in their facility letters was the provision of audited financial statements by APC to RBS within six months of the end of financial year. Such copies were provided to RBS so as to assist them for lending decision. Subsequently RBS bought an action against BJM for the losses that were suffered by RBS as a result of reliance on such audit accounts which had inaccuracies. There was an application made by BJM to strike out the claim as there was no duty of care owed to RBS. It was decided by the court as a preliminary issues that what had been pleaded by RBS was sufficient to lead to a duty of care. Thus it was found that even though there was no direct contact between the parties BJM could have disclaimed liability when it came to know that RBS would be seeing the audited accounts for lending decisions. Thus the important reason was the absence of th

The Strategy of International Business Essay Example | Topics and Well Written Essays - 4250 words

The Strategy of International Business - Essay Example This situation has not only reduced the profitability and market share of the local firms, but also has enforced a number of local firms to sell their businesses to the international giants. Hence, the report has elaborated a number of market strategies that can assist the local firms to strengthen their competitive position to ensure their long-term profitability and sustainability. The term ‘liberalization’ describes the process of relaxation of governmental regulations and restrictions in different areas such as trade, economy, social, political etc (Alessandria and Choi, 2014). Globalization has highly influenced the practices of trade and economy related liberalization within different industry sectors of developed as well as developing countries (Dix†Carneiro, 2014). The United Kingdom can be utilized as a successful example which has initiated and efficiently conceptualized liberalization in their different industry segments, mainly the energy segment. The rapid changes in the business processes and trade policies in the globalized economy influences government authorities to modify the trading policies of the nation to accommodate it with the global economy, political regulations and social practices. This intervention of government authorities has allowed a number of industry sectors to avail the facility of free trade in terms of the ir international business venture (Corbet and Robertson, 2014). The further topic will emphasize on liberalization and its impact on the internationalization of businesses. The study will also evaluate the impact of liberalization on the domestically focused business industry in terms of increase in competition within the local and global market. Finally, the discussion will elaborate various strategic reactions which can assist various domestically focused industries of the UK to face the increased competition of foreign competitors. The increasing

Leone Baxter and Clem Whitaker Research Paper Example | Topics and Well Written Essays - 1250 words

Leone Baxter and Clem Whitaker - Research Paper Example Leone Baxter was born November 20th, 1906 in Keslo, Washington. She was an avid reader growing up and would find a job writing for the Portland Oregonian. In her late twenties Baxter moved to Redding, California where she first entered the arena of promotions, landing a job promoting a water carnival for the Chamber of Commerce. She was successful in this position and would be promoted to the manager of the Chamber of Commerce in 1929. It was in this position that Baxter would first become involved in the political spectrum as she participated in the Central Valley Project referendum campaign. Clem Whitaker, Sr. was born May 1st, 1899. His uncle was a socialist who was very active in the American Civil Liberties Union and a friend of Upton Sinclair. He was a journalist writing for the Sacramento Bee where he became the city editor at the age of 19. In 1921, he founded the Capitol New Bureau, which provided political news to a wide variety of newspapers. His experience in these politi cal realms led him to become involved in political lobbying campaigns. His lobbying efforts would ultimately led to his involvement in the Central Valley project, where he would meet Leone Baxter and form Whitaker & Baxter, Inc. in 1933. Another prominent contributor to this organization was Clem Whitaker, Jr. ... Whitaker would never graduate, as in 1943 he ceased his education after joining the United States Army Air Corp to become a fighter pilot. After his discharge from the army in 1946 Whitaker would join his father’s firm, become a partner in the firm in 1950 and purchasing the company in 1958 ("Social Archives" web). At the time of its formation in 1933 Whitaker & Baxter Campaigns Inc. was the country’s first political management firm. While political campaigning had always been a complicated and brutal arena, it was understood that â€Å"with the changes in the 20th century media environment increased aid was needed to navigate these oftentimes-complex avenues† (Lathrop 12). This is what the company would provide. The company would go through a number of developments, but its primary activity was managing campaigns for political candidates as well as ballot measures. At other instance, the company would also manage corporate clients, contributing significantly to public relations campaigns for Pacific Gas and Electric Co., Western Pacific Railroad, and Utah Construction Company. While the company went by the broad name of Whitaker & Baxter Campaigns Inc., the organization also included under its auspices the Whitaker & Baxter Advertising Agency and the California Feature Service. The feature service built on the individuals’ newspaper experience and public relations ability as it acted as a vehicle to over three-hundred California newspapers; in these regards, it provided the papers with cartoons, articles, and editorials that advanced the company’s public relation interests. It was through innovative practices such as these that the company would come to be highly influential in the realm of public relations and campaign

Corporate Finance Case (MBA) Essay Example | Topics and Well Written Essays - 2250 words

Corporate Finance Case (MBA) - Essay Example Thus, this value net of taxes is added on the eight year cash flow. Lastly, the cash flows are discounted using 16% cost of capital and are added up to come up with the NPV. b. Since the decision criterion of the company is to accept projects whose payback periods are within six years, this project is viewed to have a good profit potential. Investment decision is to accept the project. c. Different from the simple payback period, the discounted payback requires the cash flows to be discounted. Thus, it is expected that the discounted payback period is longer than the simple one. In this case, the discounted payback is 5.43 years. 3. Two of the conceptual weaknesses of the payback period are the following: inability to recognize the time-value of money by treating each dollar inflow as the same whether they are generated earlier or later in the projects life and its lack of recognition for the cash inflows after the initial investment is recouped. These flaws of the payback period make it inferior to other capital budgeting techniques. For example, because it does not discount cash flow, it is not realistic to use since we know that the value of money depreciates over time. Also, it becomes misleading when assessing projects which have lower cash flows in the early project life and large ones in its later years. The payback period almost always favor projects where the investment can

Why Do Market Economies Need Government United Kingdoms Economic Essay

Why Do Market Economies Need Government United Kingdoms Economic growth, Inflation and Unemployment - Essay Example Such situations create disadvantages of buyers and reduce buyer surplus for those particular markets. For this reason, free market economy can potentially impinge on the rights of a certain segment in the economy (Acemoglu, Golosov and Tsyvinski, 2008). A fair exchange implies a relationship of equality between the persons concerned, which is absent in these scenarios. Sometimes, in a market economy the employer and the employee are not in a relationship of equality. The employer can attempt to dictate terms to the employees, therefore, a safeguarding body is required to ensure payment of minimum wages and to enforce health & safety measures (Agarwal, 2007). Government presence in needed in such situation to ensure rights of certain groups is not compromised. ii) Governments are needed to provide provision of pubic goods whose benefits are distributed over a very large population. For instance, creation of roads and national defense cannot be provided by a private enterprise. Government interventions are needed in the market economic system for these provisions (Halm, 2003). iii) Governments are also needed in market economic systems to provide social security to the citizens of the country. A market economic system cannot find mechanism to transfer funds from rich to poor. Governments serve the purpose of reducing income differences between rich and poor in an economy (Sharma, 2009). Government invention is, therefore, essential for redistribution of wealth and income for a healthy society. United Kingdom’s Economic Performance During Last Ten Years Growth Performance data of United Kingdom’s economy is graphed below. The data exhibits that the economic performance and growth rate of United Kingdom’s economy was at peak in the year 2000. The growth rate of the economy was highest which implies that the standard of living of UK citizens was increasing at a very rapid pace. GROWTH PERFORMANCE Year GDP Change 2000 3.90% 2001 2.50% 2002 2.10% 2003 2.80% 2004 3.00% 2005 2.20% 2006 2.90% 2007 2.60% 2008 0.60% 2009 ?4.9% 2010 2.10% 2011 0 .70% Growth of UK’s economy hit the bottom in the year 2009. It appeared that the economy is on the path of improvement in the year 2010; however, growth figures were low again for the year 2011. Growth Performance the annual inflation figures of UK economy shows that inflation is rising even though growth rate of the economy is slow. Such figures are considered alarming because standard of living of people is compromised in two manners – through low income growth, at the same time, a considerably high level of inflation (Baumol and Blinder, 2011). Annual Inflation Year Inflation Rate 2000 2.1% 2001 2.7% 2002 1.3% 2003 2.9% 2004 2.6% 2005 3.2% 2006 2.4% 2007 4.2% 2008 4.1% 2009 0.1% 2010 3.7% 2011 5.1% Unemployment Rate of UK’s economy is exhibiting a trend of rising with the inflation rate of the economy. This is considered one of the most challenging macroeconomic situations in macroeconomic text books. This is because a high inflation is generally associated with lower levels of unemployment since all factors of productions are considered to be highly utilized. Rising unemployment with inflation indicates major issues with the economy which need to be resolved (Henderson, 2003). Unemployment Rate Year Rate 2001 5.1% 2002 5.2% 2003 5.0% 2004 4.8% 2005 4.8% 2006 5.4% 2007 5.4% 2008 5.6% 2009 7.5% 2010 7.9% Deflationary Gaps and Appropriate Policy Responses Deflationary gap in an economy is

Leadership on The Line Essay Example for Free

Leadership on The Line Essay Recognizing the evolving definition and requirements of leadership, Heifetz Ronald and Linsky (2002) highlight the need for leaders to consider the skills and perspective to ensure their effectiveness. Leadership, as illustrated in Leadership on The LineStaying alive through the Dangers of Leading? requires not only the accomplishment of goals but also the ability to respond effectively to the human realities of working in an organization. The books three parts provide steps in recognizing leadership challenges, developing responses and interventions and what competencies leaders must develop professionally and personally. Marginalization, diversion, attack and seduction are identified as the main sources of resistance to leaders. At the same time, the authors also pay particular attention to the dangers within the leadership characterized as hunger for power and control and the difficulties in self-monitoring. The authors want to communicate to readers that there is a need for leaders to purse the development of their leadership skills. Despite the use of figurative characterizations in the book, the authors are practical and pragmatic in their discussion. The examples given, particularly in the Response section of the book is based on real life examples. Examples which the readers can easily relate directly to or parallel to their own experience. The authors point out that the sources of resistance are natural to any leadership scenario and therefore can not be fully stopped and in fact, can also be safeguard against ineffective leadership However, they have to control through resistance-response skills which in turn allows leaders to function as they are needed. Critique There is no doubt that leadership is a difficult challenge. Thus, there has been no limitation of the number of literature that aim to develop strategies and competencies for it. Unlike most literature in its genre that focuses on the development of attributes for effective leadership to become a leader, Ronald and Linsky discuss the development of leadership when one already holds office. The authors aim to provide a literature or guide to leaders who are already experiencing challenges in their roles due to a change in working scenarios or relationships. From the perspective of Heifetz and Linsky, what has become more critical for leaders to day has been the ability to go beyond their functions and respond to other people and at the same time eliciting a response from them. Thus, beyond achieving goals set members, of the organization must understand why these goals are being pursued, that â€Å"people need to know that the stakes are worth it† (p. 94). At the same time, Heifetz and Linsky state that before any action can be take to address threats to effective leadership, leaders must be able to understand the â€Å"heart† of the issues before recognizing the actions, indications or â€Å"faces† determining the threats. The main message of the book is the need for leaders not just to be competent, sensitive or responsive. They also must understand the their motivations for being so, the perspectives that can be taken, the methods that can be most effective and the implications of any perspective, opinion or action to be taken. Empathizing with the natural isolation of being the top man of an organization: there should be an acceptance that there will be member of the organization who would â€Å"undermine the clarity of his vision, delay his progress, and divert him from his core purposes† (p. 76). Thus, leaders while being advocated to be sensitive to their organization have to balance this with their resolve to accomplish organization goals. Leaders should be then prepared to be questioned, doubted and even maligned for their decisions. Heifetz and Linsky reflect that leaders often view these are criticisms to their professional and personal capacity but they should also understand that these reactions, even when they are deliberate and malicious, occur as part of the dynamics leading and organizations. Reading the book, one of the most unique ideas that Heifetz and Linsky present, absent from most of the leadership literature that I have read, is the concept of pain and leadership. The authors’ views are ones that one can easily agree and even commiserate to. The recognition of the fact that effective leadership has its pains and not just costs, both to the leader and the organization, is a perspective that makes the work effective and truly emphatic to the challenges of leadership. The view that leadership challenges, or resistance, is an ever present element in any organization does not discourage readers but actually motivates them to deal with them rather than trying to circumvent them. However, it should also be recognized that some of the examples or ideas presented may require significant experience to be understood comprehensively. This is a particular challenge in the last section of the book where the authors delineate the introspective requirements for leaders. Nonetheless, the book provides critical insights to the realities of leadership and not just what it should be. More importantly, it is effective in motivating readers view leadership as continuing process of development and that there is a need to actively pursue effectiveness. Reference Heifetz, Ronald A. and Linsky, Marty (2002). Leadership on The LineStaying alive through the Dangers of Leading, 1st Edition. Boston: Harvard Business School Press.

The Product In Service Marketing Mix

The Product In Service Marketing Mix The service marketing mix is also known as an extended marketing mix and is an integral part of a service . The service marketing mix consists of 7 Ps as compared to the 4 Ps of a product marketing mix. Simply said, the service marketing mix assumes the service as a product itself. However it adds 3 more Ps which are required for optimum service delivery. servicemarketingmix Service Marketing Mix The product marketing mix consists of the 4 Ps which are Product, Pricing, Promotions and Placement. These are discussed in my article on product marketing mix the 4 Ps. Product The product in service marketing mix is intangible in nature. The product element of the marketing mix includes the tangible good and all of the services that accompany that good to produce the final product. A product is a package, or bundle, of goods and services that comprise the total offering. For example, the purchase of a hotel room includes the guest room, fitness center, pool, restaurants, valet service, concierge, housekeeping service, etc. A restaurant meal consists of the actual food, host/hostess, and waiters, etc. Finally, a travel experience consists of a chain of products and services starting atthe time of purchase and ending upon returning from the trip. Everything in between, such as hotel service, restaurants, and transportation (including taxis and buses), affect the overall experience. Some of the variables that are part of the product decision include variety, quality, design, features/amenities, brand name, packaging, supporting services, and warranties. As stated earlier, the decision regarding the proper mix of goods and services is based on the wants and needs of consumers (the concept of marketing. Place The place element of the marketing mix includes the distribution and logistics of producing a product or service and making it available to the final consumer. The location of a manufacturing or wholesaling facility is determined by considering the costs of resources such as labor, raw materials, and real estate. In addition, it is necessary to have access to the preferred mode(s) of transportation for delivering the products to wholesalers and retailers. The location of a retail establishment is based mainly on accessibility to the final consumers. Services have relatively short channels of distribution and focus most of their efforts on finding retail locations that are convenient for consumers. For example, restaurants tend to choose high traffic areas close to shopping and other attractions. Similarly, hotels locate their facilities in areas such as airports, urban centers, industrial centers, and tourist attractions that are accessible to their respective target markets. Some of the variables that are part of the place decision include the type of channel, location, assortments, coverage area, inventory, and transportation. Many service providers overlook the importance of this variable in the strategic planning process. The channel of distribution tends to be shorter for the marketing of services than that for goods, and most service providers act as manufacturer and retailer. Many managers in service firms assume that once the initial location is determined this variable diminishes in importance. However, hotels and restaurants do switch their operations to a more favorable location on occasion. This is a major decision involving company time and resources, but it can result in long-term growth and increased profit if handled properly. Another good example of a place decision for a hotel is the Harborside Hyatt in Boston, Massachusetts.. Promotion The promotion element of the marketing mix includes all of the communications associated with marketing a product or service. The promotion mix consists of four elements: advertising, personal selling, publicity, and sales promotion. Advertising and publicity are forms of mass communication using a variety of mediums such as television, radio, newspaper, magazines, direct mail, and the Internet. Advertising is a paid form of mass communication with an identified sponsor, while publicity is a non-paid form of mass communication without a sponsor (i.e., it is free and objective). Personal selling is a form of interpersonal communication sponsored by the firm. Sales promotion is a short-term inducement to purchase a product or service. Some examples of sales promotions are contests, sweepstakes, premiums, and product bundles. Pricing Pricing in case of services is rather more difficult than in case of products. Price. Price is the value placed on a product or service. Other terms that can be used to refer to the price component of the marketing mix are: fee, rate, tuition, premium, and toll. There are non-monetary elements to price as well as the more obvious monetary elements. Some examples of non-monetary price are the time it takes to search and evaluate alternative products or services and the convenience of location. If a consumer drives to several locations to shop for a product or service, then there are costs associated with time, gas, and depreciation on the car. Also, there could be tolls for highways, bridges, or subways. In the end, it is the perceived price or the perceived value the consumer associates with a product or service that influences the purchase and the level of customers satisfaction. Value is the trade off between price and quality the benefits the consumer receives for the pr ice paid. Here on we start towards the extended service marketing mix. People : The role of the service employee becomes much more critical since to a very real extent the employee is the service, given the absence of any tangible artifact. They carry the responsibility of projecting the image of the service firm. Because of the inseparability of production and consumption of services, service delivery is characterized by interactions between customers and service employees. Service employees who experience positive human resource practices can devote their energies and resources to effectively serving their customers. The service firms human resource management practices can create an environment that elicit more positive, courteous and helpful behavior from the employees toward customers. In turn, the behavior that employees display will positively impact on service quality. Physical Evidence : Physical evidence of service includes all the tangible representations of service such as clear signage, good ventilation, adequate space, internet presence, equipment and facility. As services are intangible, customers are searching for any tangible cues to help them understand the nature of the service experience. For example, in the hotel industry, the design, furnishing, lighting, layout and decoration of the hotel as well as the appearance of its employees will influence customer perceptions of the service quality and experiences. For theme parks, restaurants, health clubs, hospitals or schools, the physical facility is critical in communicating the service and making the entire customer experience positive. Ambient conditions include background characteristics of the environment such as temperature, air quality, lighting, noise, music, and scent affect the five senses. Spatial layout of the equipment, and furnishings arranged, the size and shape of these items, and the spatial relationships among them are also crucial to influence customers perception. Process : Process is referred to as the procedures, mechanisms and flow of activities by which the service is delivered i.e. the service delivery and operating systems. Delivering customer expectations depends on how well various steps function together. Highly bureaucratized services frequently follow complicated and extensive series of actions, and the logic of the steps involved often confuse the customer. Customers may complain that service firms are slow in response and bureaucratic with the many steps involved. They want easy access to the service process, and they want things to be handled quickly, preferably by the first service employee. Customers describe frustrating experiences when they have to run from pillar to post to complete a simple transaction, experience long waiting time, rules and regulations, and personnel who decline to serve them with the excuse Im not allowed to do this or this is against our policy. Service LIC An Ordinance was issued on 19th January, 1956 nationalizing the Life Insurance sector and Life Insurance Corporation came into existence in the same year. The LIC absorbed 154 Indian, 16 non-Indian insurers as also 75 provident societies-245 Indian and foreign insurers in all. The LIC had monopoly till the late 90s when the Insurance sector was reopened to the private sector. History Life Insurance Corporation of India (LIC) was formed in Sep 1956 after the Parliament of India passed the Life Insurance Corporation Act in Jun 1956. The company was created with the objective of spreading life insurance more widely, especially to reach all the insurable people in the rural areas and provide them with adequate financial cover at a reasonable cost. Apart from its corporate office, LIC had five zonal offices, 33 divisional offices and 212 branch offices in 1956. The nature of life insurance contracts being long-term coupled with the need to provide a variety of services during the term of the policy, LIC re-organised itself by opening a number of new branch offices. After its re-organisation, servicing functions were transferred to branches which were converted to accounting units. Operations As on Mar 2008, LIC had 2,048 fully computerised branch offices, 109 divisional offices, eight zonal offices apart from its corporate office. LICs network connects all the branches through wide area network. The company also has tie-ups with certain banks and service providers to offer on-line premium collection facility in select cities. Besides, ECS and ATM premium payment facility to its customers, the company has also commissioned IVRS and information centres at Mumbai, Ahmedabad, Bangalore, Chennai, Hyderabad, Kolkata, New Delhi, Pune, amongst other cities. LIC has also launched Satellite Sampark offices in order to provide easy access to its policy holders. The company had 340 such offices as on Mar 2008. LIC also provides housing finance through LICHFL. It has also formed an asset management company known as LICMF AMC. The corporation has also extended its operations to the international arena; through various JVs and subsidiaries it operates in as many as nine countries. Products Services LIC offers a wide array of insurance products to its customers such as insurance plans, pension plans, unit-linked plans, special plans and group scheme. During FY08, the company introduced certain new products such as Profit Plus, Fortune Plus, Jeevan Akshay, Jeevan Amrit Amulya Jeevan. As of Mar 2007, total number of agents of the company stood at 1.1 mn while the total number of policies issued was 38.2 mn. The premium earned by the company reported a growth of 41% in FY07 when compared to the previous year. During the year, the company insured 34.28 mn individuals for the first time 7 P`s of Services Marketing in LIC The marketing mix is the combination of marketing activities that an organization engages in so as to best meet the needs of its targeted market. The Insurance business deals in selling services and therefore due weight-age in the formation of marketing mix for the Insurance business is needed. The marketing mix includes sub-mixes of the 7 Ps of marketing i.e. the product, its price, place, promotion, people, process physical attraction. The above mentioned 7 Ps can be used for marketing of Insurance products, in the following manner: PRODUCT: A product means what we produce. If we produce goods, it means tangible product and when we produce or generate services, it means intangible service product. A product is both what a seller has to sell and a buyer has to buy. Thus, an Insurance company sells services and therefore services are their product. In India, the Life Insurance Corporation of India (LIC) is the leading companies offering insurance services to the users. Apart from offering life insurance policies, they also offer underwriting and consulting services. When a person or an organization buys an Insurance policy from the insurance company, he not only buys a policy, but along with it the assistance and advice of the agent, the prestige of the insurance company and the facilities of claims and compensation. . In short, the formulation of product-mix should be in the face of innovative product strategy. While initiating the innovative process it is necessary to take into consideration the strategies adopted by private and foreign insurance companies through various plans like Endowment plan, pension plan, ULIP. PRICING: In the insurance business the pricing decisions are concerned with: i) The premium charged against the policies, ii) Interest charged for defaulting the payment of premium and credit facility, and iii) Commission charged for underwriting and consultancy activities. . The pricing in insurance is in the form of premium rates. The premium rates are revised if there are any significant changes in any of the below factors. a) Mortality b) Expenses c) Interest PLACE: This component of the marketing mix is related to two important facets i) Managing the insurance personnel, and ii) Locating a branch. . While locating branches, the branch manager needs to consider a number of factors, such as smooth accessibility, availability of infrastructural facilities and the management of branch offices and premises. In addition it is also significant to provide safety measures and also factors like office furnishing, civic amenities and facilities, parking facilities and interior office decoration should be given proper attention. Thus the place management of insurance branch offices needs a new vision, distinct approach and an innovative style. This is essential to make the work place conducive, attractive and proactive for the generation of efficiency among employees. The branch managers need professional excellence to make place decisions productive. PROMOTION: Advertising and Publicity, organization of conferences and seminars, incentive to policyholders are impersonal communication. Arranging exhibitions, participation in fairs and festivals, rural wall paintings and publicity drive through the mobile publicity van units would be effective in creating the impulse buying and the rural prospects would be easily transformed into actual policyholders. PEOPLE: Understanding the customer better allows designing appropriate products. Being a service industry which involves a high level of people interaction, it is very important to use this resource efficiently in order to satisfy customers. Training, development and strong relationships with intermediaries are the key areas to be kept under consideration. Training the employees, use of IT for efficiency, both at the staff and agent level, is one of the important areas to look into. PROCESS: The process should be customer friendly in insurance industry. The speed and accuracy of payment is of great importance. IT Data Warehousing will smoothen the process flow. IT will help in servicing large no. of customers efficiently and bring down overheads. Technology can either complement or supplement the channels of distribution cost effectively. It can also help to improve customer service levels. The use of data warehousing management and mining will help to find out the profitability and potential of various customers product segments. PHYSICAL EVIDENCE: The physical evidence are includes such as policy document, statements, intimation letter, uniforms of personnel, vending machine of LIC enquiry option , LIC logo and their awards. AXIS BANK Axis Bank Limited was the first of the new private banks to have begun operations in 1994, after the Government of India allowed new private banks to be established. The Bank was promoted jointly by the Administrator of the specified undertaking of the Unit Trust of India (UTI I), Life Insurance Corporation of India (LIC) and General Insurance Corporation of India (GIC) and other four PSU insurance companies, i.e. National Insurance Company Ltd., The New India Assurance Company Ltd., The Oriental Insurance Company Ltd. and United India Insurance Company Ltd. The Bank today is capitalized to the extent of Rs. 358.56 crores with the public holding (other than promoters) at 57.60%. The Banks Registered Office is at Ahmedabad and its Central Office is located at Mumbai. Presently, the Bank has a very wide network of more than 701 Branch offices and Extension Counters. The Bank has a network of over 2854 ATMs providing 24 hrs a day banking convenience to its customers. This is one of the largest ATM networks in the country. The Bank has strengths in both retail and corporate banking and is committed to adopting the best industry practices internationally in order to achieve excellence. Axis Bank Limited has been promoted by the largest and the best Financial Institution of the country, UTI. The Bank was set up with a capital of Rs. 115 crore, with UTI contributing Rs. 100 crore, LIC Rs. 7.5 crore and GIC and its four subsidiaries contributing Rs. 1.5 crore each. THE SERVICE MARKETING MIX OF AXIS BANK PRODUCT The main products of AXIS Bank are Saving Account, Current Account and Demat Account. The other products are Home loan, personal loan, Insurance, Credit cards, etc. For better marketing of products, the products are categorized under Axis Bank and Axis Sales. Products under Axis Bank are Saving Account Current Account Forex Department Salary Accounts Products under Axis Sales are Home loan Personal loan, Demat Account PRICE The price of the product depends upon the services provided by the Bank on the respective product to the customers. Detailed pricing changes from time to time and the same can be found on the website of Axis bank. PLACE Place plays an important role in tangibilizing service offerings. Quality of service is perceived by many customers in the form of place of delivery- locational appeal, interiors, ambience, etc. If a bank is located in a crowded market the place or location will be a negative tangibilizes. Providing excellent tangibles in the form of place or location and interiors is particularly important for appealing to the customers segment. More recently, some of the private banks in India like AXIS Bank are providing very attractive tangibles in the form of their locations, exteriors and interiors. PROMOTION Promotion can tangibilize services in different forms: Visualization Association Physical representation Documentation. Visualization tangibilizes services through hoardings, TV and print campaigns or advertisements. Physical representation in services has a good promotional appeal to customers like use of colors to symbolize wealth and status. Service providers use documentation in their promotions in support of their claims for dependability, popularity and responsiveness PEOPLE People are a common factor in every service. And people tangibilize services. Good people (means good performance) make good or successful services. Bad performers deliver bad services. PROCESS Customer defined business process- Process innovations and continuous improve- ment through people involvement. Result oriented approach- Each process has been designed by first planning the desired results. Axis Bank is constantly taking initiatives to offer the best in class service that seek to enhance customer experience. PHYSICAL EVIDENCE Reduce paper usage- Due to technological innovations such as use of Finacle software for core banking solutions. It has positioned it self as a bank which gives higher standard of services through product innovation. Satisfies the diverse need of individual and corporate clients. It is customer centric, and service oriented . Now we will compare the strategies of both axis bank and adlabs, LIC provides life insurance policy, like Endowment plan, pension plan, ULIP. Axis bank also offers variety of products like Saving Account, Current Account and Demat Account. The other products are Home loan, personal loan, Insurance, Credit cards In LIC the pricing decisions are concerned with :i) The premium charged against the policies, ii) Interest charged for defaulting the payment of premium and credit facility, and iii) Commission charged for underwriting and consultancy activities. . The pricing in insurance is in the form of premium rates. The price of the product depends upon the services provided by the Bank on the respective product to the customers. LIC consider a number of factors, such as smooth accessibility, availability of infrastructural facilities and the management of branch offices and premises Quality of service is perceived by many customers in the form of place of delivery- locational appeal, interiors, ambience, etc. If a bank is located in a crowded market the place or location will be a negative tangibilizes. AXIS Bank are providing very attractive tangibles in the form of their locations, exteriors and interiors. Advertising and Publicity, organization of conferences and seminars, incentive to policyholders are impersonal communication. Arranging exhibitions, participation in fairs and festivals, rural wall paintings and publicity drive through the mobile publicity van. Visualization tangibilizes services through hoardings, TV and print campaigns or advertisements. Physical representation in services has a good promotional appeal to customers like use of colors to symbolize wealth and status. Service providers use documentation in their promotions in support of their claims for dependability, popularity and responsiveness .LIC being a service industry which involves a high level of people interaction, it is very important to use this resource efficiently in order to satisfy customers. Training, development and strong relationships with intermediaries are the key areas to be kept under consideration. In axis bank Good people (means good performance) make good or successful services. Bad performers deliver bad services. The process should be customer friendly in insurance industry. The speed and accuracy of payment is of great importance. IT Data Warehousing will smoothen the processflow. IT will help in servicing large no. of customers efficiently and bring down overheads Customer defined business process- Process innovations and continuous improve-ment through people involvement.Result oriented approach- Each process has been designed by first planning the desired results.Axis Bank is constantly taking initiatives to offer the best in class service that seek to enhance customer experienc The physical evidence are includes such as policy document, statements, intimation letter, uniforms of personnel, vending machine of LIC enquiry option , LIC logo and their awards In Axis bank physical evidenceReduce paper usage- Due to technological innovations such as use of Finacle software for core banking solutions.It has positioned it self as a bank which gives higher standard of services through product innovation. CONCLUSION There is littile bit similarity in the service marketing mix of LIC and axis bank but there is difference in the marketing strategy of the both companies

Health Benefits of Dark Chocolate

Health Benefits of Dark Chocolate Natalija Miller Get Your Daily Dose of Chocolate: The Darker, The Better! It has been reported that there are certain types of bacteria located within the human stomach that will actually ferment chocolate into heart-healthy, anti-inflammatory compounds. At the 247th National Meeting Exposition of the American Chemical Society, hosted at the Dallas Convention Center this last March, this conclusion was drawn and presented. Maria Moore who is surprisingly enough, an undergraduate student working on this research stated that two different types of microbes live within a person’s stomach. There are good ones like â€Å"Bifidobacterium and lactic acid bacteria†, which help to break down the chocolate, and then there’s the not so great ones such as some forms of Clostridia and E. coli, which have been known to not only produce inflammation, but also to potentially cause â€Å"gas, bloating, diarrhea and constipation†. She notes that, â€Å"When you eat dark chocolate, they [the good microbes] grow and ferment it, producing compou nds that are anti-inflammatory†. These researchers from Louisiana State University, led by John Finley, Ph.D., are the first to be conducting a study about dark chocolate’s effects on the multiple bacteria that reside within the stomach. It was said that when the compounds are absorbed, they effectively reduce the possibility of a stroke in later years by lessening cardiovascular tissue inflammation. By testing a total of 3 different types of cocoa powder in a mock digestive tract composed of â€Å"modified test tubes† used to mimic normal digestion, these researchers, â€Å"subjected the non-digestible materials to anaerobic fermentation using human fecal bacteria†. The main ingredient in chocolate, the thing that makes chocolate, chocolate cocoa powder, contains an abundance of polyphenolic compounds (antioxidants) catechin and epicatechin being two prominent examples and dietary fiber in a relatively small amount, both of which are â€Å"poorly dig ested and absorbed†. Finley then explained that, â€Å"In our study we found that the fiber is fermented and the large polyphenolic polymers are metabolized to smaller molecules, which are more easily absorbed. These smaller polymers exhibit anti-inflammatory activity†. Also, polyphenols found in the stomach may be converted or transformed to reduce inflammation by joining together prebiotics and cocoa powder fiber, increasing one’s overall health. Prebiotics can be defined as complex carbohydrates that cannot be broken down and digested, but the good bacteria in the stomach like to â€Å"eat† them. Finley then went on to say that, â€Å"When you ingest prebiotics, the beneficial gut microbial population increases and outcompetes any undesirable microbes in the gut, like those that cause stomach problems†. This article ended with a note on how dark chocolate could prove to be even more beneficial if combined with things like pomegranate, acai berry or other solid fruits (American Chemical Society, 2014). As far as how this concept pertains to the things that we have talked about in class this past year, we may need to dive a little deeper into the process than this article goes. Because we have yet to really learn anything about physio-chemistry which is where a vast majority of these concepts apply we’re going to have to talk in rather general terms. Considering the fact that the class is termed, â€Å"General Chemistry†, it would seem reasonable to do just that. First things first, we must consider a lab that was done rather early on in the year. While discussing solubility in class, a lab was done in which a certain solution was suspended in a test tube, combined with another solution and then heated until a solid was produced. This process formed something called a ‘precipitate’. Precipitate is define in the dictionary as, â€Å"to cause (something solid) to become separated from a liquid especially by a chemical process† (referring to the proc edure) or merely as a â€Å"a substance precipitated from a solution† (the solid itself) (Merriam-Websters online dictionary, n.d.). The other concept worth taking note of is thermodynamics. We have discussed Gibbs Free Energy in class these past few weeks. This too plays a role. A. D. McNaught and A. Wilkinson, the compilers of Compendium of Chemical Terminology, 2nd ed. (the Gold Book), refer to a process called Ostwald Ripening a process in which small, solid particles in a liquid compound are taken out of solution, while the dissolved species residing on the outside of those larger particles undergo redeposition. This process is one of the key underlying contributors to digestion. Food enters the stomach which is suspended (allowing the effects of gravity) placed in a solution of hydrochloric acid, potassium chloride, and sodium chloride (gastric acid) (Stewart, 1981), heated by the body, and then, through Ostwald Ripening, the food comes out as a larger, â€Å"purer/cleaner† (American Chemical Society, 2014), precipitated substance . One of the reasons why this process goes over so smoothly is because, â€Å"smaller particles have a higher surface energy, hence higher total Gibbs energy, than larger particles, giving rise to an apparent higher solubility† (McNaught Wilkinson, 1997). These concepts are important to take note of, with respect to the article about how great dark-chocolate is for a person’s overall health, because in order to understand how the chocolate is broken down and absorbed, there needs to be a foundation for how the process works in general. Understanding that the substance will dissociate in the stomach and the essentials for that operation, will open up a better foundation for someone to apprehend what the article was stating. The researchers concluded that chocolate contains two poorly digested materials. After the brief discussion on what digestion is, it can determined that chocolate has certain substances that cannot be precipitated. What then does the body do with what it cannot digest, or break down? Well, the answer according to the article is that they are â€Å"eaten†, fermented, metabolized and then absorbed by bacteria. In the case of cocoa powder, the products of this process have anti-inflammatory properties and can reduce the risk of stroke and stomach problems (American Chemical Society, 2014). Even though all the information on digestion was not included in this article, I thought what they did include was sufficiently put together, but in my personal opinion, to anyone who isn’t already knowledgeable about the subject in at least some capacity, would walk away from the article thinking nothing more than, â€Å"Sweet, dark-chocolate is good for me. I should eat more of it.† While this article is not necessarily promoting such action, it’s not opposing it either. The information, however, seems to be geared towards those who do, in fact, have an already established foundation for this type of material. I thought that the article was very reader-friendly and tried to give anyone curious enough to read about it a basic overview of the study, but I was ultimately left questioning more than I was before reading it. Because of what I have learned about thermodynamics, solubility and precipitation, I have to wonder a couple of things. For instance, how do good bacteria â€Å"eat† away the complex carbohydrates and dietary fiber and then ferment it? Is the process drastically different than digestion? What sort of heat is needed for that reaction to occur? I am interested in how, at the end of each process both digestion and fermentation/metabolization nutrients from the substance eaten are absorbed. How is the process of events different for each reaction? I have to wonder how these compounds have anti-inflammatory properties after absorption. What do those bacterium do to the dark-chocolate’s components, and ultimately, why isn’t the bacteria digested or fermented? Does it have to do with what reactions occur within the stomach? That would my best guess. These are all questions that I ask myself now because general chemistry has taught me a lot about reactions, what will react, what won’t and in what capacity. Because of that, I am left wondering more about what it is exactly that is happening in my stomach, not only when I eat dark-chocolate, but any time I put food in my mouth. How does our body know how to process certain foods? This concept is very interesting, and I have general chemistry to thank for that. Works Cited American Chemical Society. Press Room. (2014, March 18). The precise reason for the health benefits of dark chocolate: mystery solved. Retrieved May 29, 2014, from http://www.acs.org/content/acs/en/pressroom/newsreleases/2014/march/the-precise-reason-for-the-health-benefits-of-dark-chocolate-mystery-solved.html McNaught, A. D., Wilkinson, A. (1997). Ostwald ripening. Compendium of Chemical Terminology (the Gold Book). Oxford: Blackwell Scientific Publications. precipitate. n.d., In Merriam-Webster.com. Retrieved May 29, 2014, from http://www.merriam-webster.com/dictionary/precipitate Stewart, P. A. (1981). Chapter 1: 1.5 Other Bodily Fluids. How to understand acid-base: a quantitative acid-base primer for biology and medicine. New York: Elsevier.

The Bag of Weed :: Personal Narrative Essays

The Bag of Weed "Come on, it's just one hit, no one will ever find out." We all gathered around the pipe, anxiously awaiting our turn. It was 1:00 in the morning and everyone was asleep, including the dean, or so we thought. Earlier that morning, a friend came up to me excitedly announcing her purchase. She had gotten a bag of weed. I showed a look of approval, not quite caring or knowing what was ahead. I soon would be part of that deal, but at a much higher price. After the evening activities, we all piled back into the dorm and started heading to each other's rooms. It was a Friday night, and it was nearly impossible to go to bed before 12:00. As our group of friends all sat there, the idea of getting stoned got thrown into the pot. Being at a Christian school, not very many of us had ever done that before, especially not in the dorm. "There's a first time for everything," one of the girls piped in. We all agreed it would be fun, but knew the consequences if we were to get caught. After contemplating it all, we decided to at least wait until 1:00, when everyone started going to bed. The time passed quickly as we discussed our plan. We would make a pipe out of an empty pop can, put towels under the door to help stop the smoke from leaking out, and turned on the fan by the window so it would help blow the smoke out. We definitely had it all figured out. The weed was brought out, and placed ever so carefully on the can. We passed it around, and one hit turned into two and two into four. By that time we were all laughing hysterically, obviously needing nothing to laugh at. After we put the weed away, we sat there laughing, joking, eating and just having fun, thinking we were good to go. Minutes later, a knock came at the door, making each of our heart beats come to a halting stop. As the door opened, the dean appeared like a ghost in the night and we all knew we were busted. "Where's the cigarettes?" she asked. We all sat there, looking dumbfounded, and wishing it were only cigarettes because the consequences for that were less severe. She stood at the door for a few minutes, staring at us with a look of complete disappointment on her face, before walking out the door, shutting it behind her.

Comparative Essay on Romantic Poetry - In London, September 1802 vs. :: English Literature

Comparative Essay on Romantic Poetry - In London, September 1802 vs. The World Is Too Much With Us Late and Soon - Wordsworth Wordsworth's poems initiated the Romantic era by emphasizing feeling, instinct, and pleasure above formality and mannerism. More than any poet before him, Wordsworth gave expression to unformed human emotion; his lyric "Strange fits of passion have I known," in which the speaker describes an inexplicable fantasy he once had that his lover was dead, could not have been written by any previous poet. The message that these poems sent across may be interpreted as being cynical and nostalgic towards the people, nation and the era in which the author lives. In The World is Too Much, the speaker angrily accuses the modern age of having lost its connection to nature and to everything meaningful: "Getting and spending, we lay waste our powers: / Little we see in Nature that is ours; / We have given our hearts away, a sordid boon!" He says that even when the sea "bares her bosom to the moon" and the winds howl, humanity is still out of tune, and looks on uncaringly at the spectacle of the storm. The speaker wishes that he were a pagan raised according to a different vision of the world, so that, "standing on this pleasant lea," he might see images of ancient gods rising from the waves, a sight that would please him greatly. He imagines "Proteus rising from the sea," and Triton "blowing his wreathed horn." This poem in a very clear manner shows the flaws of society and his views against such flaws. In London, September 1802 Wordsworth's views are not so clear. The use of such accusations "The Wealthiest Man among us is the best": /"For comfort, being, as I am, opprest". The foundation of this poem is not condemning all that is in his life but nature, rather he attempts to show the shortcomings of society in an effort to go back and reflect upon the lost ways of the past. This is supported with excerpts like "We must run glittering like a brook" and "No grandeur now in nature or a book" show the author's view that there is potential for society and that is has the ability to change. This is quite contrary to the pessimistic outlook of The World is Too Much. The structure of both these poems is that of an Italian sonnet much like many other famous sonnets Wordsworth wrote in the early 1800s. Sonnets are fourteen-line poetic inventions written in iambic pentameter. An Italian or Petrarchan sonnet is divided into two parts,

The Practice Of Concrete Repair Health And Social Care Essay

Concrete fix can be defined as the act of regenerating, reconstructing, or replacing of any concrete or concrete surfaces after initial arrangement ( Smoak et al, 2002 ) . In general, the demand for concrete fix can originate from different causes which may change from minor concrete holes or cracks- such as ensuing from minor imperfectnesss due to snap-tie holes or she-bolt holes, to major amendss ensuing from external factors or structural failures. In pattern, it is found that the bulk of the defects can be repaired or made good, while in some instances it is frequently found that the rebuilding of the single member or construction is frequently economical ( Allen et al, 2005 ) . It is agreed in general that the protection and the fix of the concretes are complex undertakings which requires particular attending and incorporate cognition of different specializer Fieldss. Due to the explosive growing of economic systems around the universe and due to the increased investing in substructures ( particularly in footings of care, Restoration and fix ) in the recent old ages, the fix and protection of concrete constructions has become a major subject of both scientific and economic involvement. As a consequence, the building industry has faced many challenges and demands. Underneath these demands lies the fact that the concrete construction deteriorate over clip at unbearable rates. As such, it is extremely necessary to develop the ways by which the life of the concrete constructions can be increased. There is besides a demand for appropriate tools and techniques to transport out the undertaking of fix and care of the concrete constructions within the limited budgets available. It is besides of import to see the importance of environmental conditions to which the concrete constructions are exposed while sing the tools and techniques employed for the fix of the constructions. The field of concrete fix calls for the integrated cognition ( expertness ) of different scientific Fieldss. The basic thought behind this fact is that the edifices or the concretes are confronting different environmental or external conditions and around the universes, the field pose many challenges to both the academe and the practicians likewise. Added to this, the fact that many edifices have their ain history and nature, it becomes necessary to develop and implement single schemes and solutions for the protection, fix and care of concretes. As a consequence of these complications, different basic schemes and solutions has been developed of the fix of the concrete constructions ( Raupach, cited in Alexander et Al, 2009 ) . This highlights the fact that this country requires knowledge from different Fieldss and that the sphere of the topic is more of interdisciplinary in nature.2.2.1 The pattern of concrete Repair:There are different criterions to which the pattern of fix of the c oncrete should be carried out. EN 1504 provides 43 methods to mend and protect the concrete constructions which are based on 11 different rules. However, it is by and large recommended that the interior decorator can take the appropriate solution depending on different conditions like the economical and proficient considerations ( Alexander et al, 2009 ) . It has besides been recommended in the old surveies that while choosing the optimum methods for different state of affairss, the interior decorator should look into in item the particular inquiries such as the needed degree of care, lastingness, and the sustainability ( ibid ) . Many writers have based their plants on the subject of concrete fixs ( Wall and Shrive, 1998 ; Kuhlmann, 1990 ; Plum, 1990, etc ) . Though there are many methods or criterions sing the concrete fixs, it can besides be noted that there is no standard design specification for the fix of the concretes. It can be argued from an beginning that a proper apprehension of why the spots fail could perchance cut down the figure of failures. However, due to the absence of standard design process for the fix of the concretes and the deficiency of apprehension, many research workers have now concentrated their attempts towards understanding the lastingness of fix spots.2.3 Adhesion between the concretes:In the field of concrete research, the adhesion between the concrete is one among the largely researched subjects. This has been argued to be an of import facet that influences the lastingness and the dependability of the spot up or the fix works ( Czarnecki et al, 2007 ) . In general, adhesion which can be considered as a basic issue in the fix of the concretes can be defined as the attachment of two stuffs in contact ( Czarnecki, cited in Alexander, M. G. , et Al, 2009 ) . The EN 1504-10 criterions ( European Standards ) used the term ‘bond ‘ to bespeak the adhesion that takes topographic point between the old concrete and the new concrete. As such, it is an of import factor that can besides find the effectivity of the fix. Fiebrich ( 1994 ) divided the adhesion mechanisms into three types ; mechanical interaction, chemical bonding and thermodynamic mechanisms. The European Standards, EN 1504 provides two ways of look of the formulated bond degree consequences of the adhesion ( Czarnecki, cited in Alexander, M. G. , et Al, 2009 ) . Threshold value in MPa ; towards structural fix ( EN 1504-3 ) : & gt ; 2,0MPa ( Class R4 ) , & gt ; 1,5 MPa ( Class R3 ) ; Pass/fail standards towards structural bonding ( EN1504-4 ) e.g. hardened concrete-to-hardened concrete or fresh concrete-to-hardened concrete: the trial shall ensue in break in the concrete. Once the bond is formed between the concretes, the bond can so be said to be effectual merely if the freshly formed bond ensures an even distribution of the emphasiss and an effectual transportation of burden without failure. Specifically, it has been found that the addition in adhesion, consequences in higher tolerance on non-compatibility belongings of both the old concrete and the new covering stuff ( Czarnecki et al, 2007 ) .2.4 Factors impacting Adhesion:There are many basic theories on adhesion that describe the mechanisms of the attachment between the old concrete and the new sheathing stuff. The chief theories pointed by different writers on the subject are the soaking up theories and the mechanical blocking theories ( Emmons et Al, 1994 ; Santos et Al, 2007 ; Maerz et Al, 2001 ) . Briefly, in the first theory associating to the thermodynamic surface assimilation the intermolecular forces or the Van der waal forces, the chemical linkage through the interface and the H affair increases the bond between the old and the new concrete. The 2nd theory of mechanical blocking can be broken down at two degrees foremost macroscopic in which the raggedness of surface creates mechanical blockings between shea thing and concrete and secondly at microscopic degree, the surface porousness at the interface substrate, comparable to a micro-roughness, facilitates grounding by tangle of hydrates, Bouksani et Al ( 2010 ) . Czarnecki ( 2009 ) in his research about the adhesive facets of the concrete bonds gave a important decision. He concluded that there are many factors impacting the adhesive strengths. These included: The belongingss of the fix stuffs: this included, viscousness, shrinking during puting, surface tenseness, weirdo, etc. Old concrete ( concrete substrate ) : strength of the stuff, presence of drosss, clefts present on the surface and the micro clefts, porousness of the stuff, the raggedness of the surface, etc, . The consequence of the environment: the degree of temperature- the alteration and the rate of alteration, presence of moisture- humidness degree and the alteration of humidness degree, the phenomenon of transportation- suction due to capillary consequence, the loading-mechanical burden, ageing, consequence of corrosion etc, . All these factors mentioned supra could act upon the bond between the concretes. Many of the factors could increase the bonds between the concretes but, in most of the instances, these grounds cause devastation in concrete bonds. Due to these grounds, it is obvious there is still a demand for the High Adhesive Repair Materials to be used in the fix patterns in order to turn to these issues. It has been identified that adhesion will depend on many factors. These are chiefly due to the phenomena that take topographic point at the interface country of the concretes ( Slater, 2001 ) . The chief phenomena includes, raggedness of the stuff surface, presence of wet on the surface, the humidness degrees of the external environment, external burden, wetability of the surface, the belongingss or the influence of the linear stuffs, etc, . The importance of surface raggedness, wet status and bring arounding status is frequently highlighted in many researches. It has been said that the first measure in fix or the care of the concrete after taking the method is to fix the surface of the bing concrete on to which the concrete is to be laid. This may include the remotion of the bing deteriorated concrete bed so that this can be replaced by the new stuff. The strength will depend on the grade of attachment of the new stuff on to the bing stuff. However, the influence of the raggedness and the wet of the surface besides contribute to the overall bond between the old and the new concrete. Therefore, it is really of import to guarantee that the wet and the roughness quality of the surface is achieved to the needed degree before the new concrete is laid on to the bing concrete ( Courard, 2000 ) . The difference in the consequence of the researches carried out by different research workers could be observed on ; the status under which the hardening is carried out ; the humidness status ; the bonding agents used in the experiment ; the temperature at which the trial is carried out ; the age of the specimen ; the type of the trial employed ; the design/setup of the specimen, etc. To this point, Julio et Al ( 2004 ) argued the importance of different trial parametric quantities to be considered while comparing the consequences. They noted that these differences produced contradictory consequences and as such, there is no consensus in the findings. Therefore it is by and large agreed that the comparing of findings appear to be hard. But, to acquire an overview of the current cognition and substantial findings some of the major factors that affect the adhesion between concretes are discussed below.2.4.1 A individual survey sing assorted factors:Wall et Al ( 1988 ) investigated the factors impacting the bond between the old and the new concrete in concrete fixs. The experiment was carried out to research the effects on the bonds based on different parametric quantities. These parametric quantities included the thickness of the bed of the bonds, the ratio of the cement and H2O used in fixing the howitzer, the influence of different conditions under which the hardening procedure was carried out, the influence of wetting the surface of the old concrete onto which the new concrete is laid, the influence of the hold between blending the copolymer PVA bonding agent and its application to the old concrete. The major difference that can be noted from the survey carried out by Wall et Al ( 1988 ) and other researches is the difference in the bonding strength of the specimens incorporating the Portland cement to the specimens that contained Copolymer PVA agents. It was observed in their survey that the specimens that contained Portland cement howitzer were stronger than the PVA agent 1s. Major differences were besides found in the trials associating to the thickness of the new concrete bed or the repair stuff applied to the older concretes. It was found that the strength increased when the thickness reduced ( 1/8 in and 3/16 in proved stronger than the 1/4 in bed ) . However, the writers do non give farther account sing this phenomenon. Notably, the research did non supply clear account about the affect of cement to H2O ratio. The compressive strengths for different H2O to cement ratios were found to be different. Ultimate compressive emphasis for a H2O cement ratio of 0.32 was found to be lower ( 1870 pounds per square inch lower ) than the one which had a H2O cement ratio of 0.40 by this observation, Wall et Al ( 1988 ) concluded that the bond strength between the two concretes decreased as the H2O cement ratio besides decreased. One another determination was about the surface status of the substrate concrete before the application of the new bed. It was found that the pre-wetting of the substrate before the application of the new bed resulted in bettering the strength of the bond. In instances when the PVA bonding agents dried before the application of the fix stuff to the surface, it was found that the compressive strength of the bonds decreased by 10 % . However, it was besides found that the howitzers with PVA modified cements produced higher bond strength. One other of import facet found was the influence of the bring arounding status on the strength of the bonds. Different specimens were cured under different hardening conditions. It was found to impact the ultimate strength. Though it was found that the specimens that were cured under high humidness conditions ( 100 % ) had greater strengths than the 1s cured in less humid conditions, the differences were non considerable. Hence it was concluded that the grade of influence was little when sing other parametric quantities.2.3.2 Influence of Material for the Repair:Though there are many methods that can be followed while mending the concretes, it is advised that proper attention should besides be taken while sing the fix stuff. Once these have been selected, the following of import measure is to clearly understand the conditions that the concrete will see over its life. Some of the cardinal factors are the conditions conditions, chemical exposures, the scope of temperature, the magnitu de of the burden and the continuance to which the concrete is exposed to the burden, the nature of the spot ( aesthetic or structural ) , etc. It is of import to see these facts because different researches in to the field of the concretes have shown that the public presentation of the spot stuff varies under different conditions. It can be argued that proper attention should be taken while choosing the spot stuffs by giving proper consideration to the stuff belongingss of the substrate concrete and the old concrete and the conditions to which the concrete will be exposed over its life. It could be recommended that the stuffs with different belongingss could be selected merely if the bond strengths are non affected and further it does non do any lastingness jobs ( Wipf et al, 2004 ) . However, it is critical to guarantee that the internal emphasiss do non transcend the tensile emphasiss of the substrate ( Wipf et al, 2004 ) .Influence of Adulthood:The bond between the substrate and the new concrete has besides been linked with the adulthood of the sheathing. This was pointed by Delatte et Al ( 2000 ) . To lucubrate over this subject, they linked the adulthood of the sheathing to the bond strength, which in bend was related to the overall strength of the stuff ( interface ) . It was concluded in their research that the early- age strength of the concrete had important consequence on the bond strength and the tensile strength of the stuff. These groups of researches have besides highlighted that sheathing or the interface as one of the major zones of the break. Therefore, harmonizing to Beushausen and Alexander ( 2008 ) , mechanisms of bond failures in relation to the parametric quantities of stuff and the location of failure will necessitate farther research.2.3.3 Influence of Test Method:It has been argued in the old diaries that the quality of the bond strength can be influenced by a scope of parametric quantities associating to the stuff and the conditions o f the environment ( Alexander and Beushausen, 2008 ) . Another of import factor is the trial method used. There are assorted test methods proposed to measure bond belongingss and public presentation of fix stuffs in general. They include the tensile bond, slant-shear, twist-off, flexural and patch trial etc. , However each trial is influenced by different combinations of factors and can non give entirely a full image ( Austin et al,1999 ) . For case, Momayez et Al ( 2005 ) reported in their survey that in few instances bond strength from some trials were upto eight times higher than those obtained from other type of trials. Additionally, it is of import to observe that the mechanical adhesion in tenseness varies well from that in shear ( Alexander and Beushausen, 2008 ) . Therefore, it can be argued that the positions of different writers ‘ will besides depend on the pick of the methods used in finding the bond strength.2.3.4 Condition of the surface of the interface:The bond strength besides depends on the general status of the surface like cleanliness. There is besides particular industry criterions to which the cleansing and preparing of the concrete surface should be carried out before the fix is carried out ( Charles and Scott, 1997 ) . In add-ons to these criterions, there are besides many standard recommendations provided by different makers of the fix material merchandises. The more normally known industry criterions are: ASTM D 4258 Surface Cleaning Concrete for Coating ; ASTM D 4259 Abrading Concrete ; ASTM Standards for Cleaning, Surface Preparation, and Testing ; ASTM D 4285 Indicating Oil of Water in Compressed Air, etc. One of the major points to be considered while cleaning the surface is the presence of the surface contaminations. This can be in the signifier of liquids or solids. There is a possible menace that these contaminations could jobs for the application of the stuff, hardening, adhesion or other things which are critical for organizing the bond between the two concrete beds ( Wipf et al, 2004 ) . It is noted that the presence of dust and unsound concretes are besides a major barrier for organizing a strong bond between concretes. It is recommended that the usage of the doodly-squat cock be avoided when covering with the damaged concretes. Alternatively, the usage of the chisel and cock can guarantee that the structural belongingss of the concretes are non affected ( Ibid ) .2.3.5 Influence of Roughness:The influence of the raggedness to the bond strength between the concretes has been argued by many writers. It has been argued in the old surveies that the add-on of the ordinary concrete on to the interface that is unsmooth green goods better consequences than the 1 that was laid on to the smooth interface ( Garbacz et al, 2006 ) . These findings are similar to the 1s investigated by other writers excessively. Matana et Al ( 2005 ) identified in their research that the bonds between the concretes provided good bond strength when the stuff had unsmooth interface. Similar consequences were besides given by Courard ( 2006 ) . Roughness of the substrate surface is frequently presented as the most of import factor to accomplish a good bond. This betterment is chiefly assigned to the addition of the contact surface ( Talbot et al 94, Santos et al 07 ) . On the other manus through the survey done by Perez et Al ( 2009 ) , while analyzing about the correlativity between the raggedness of substrate surface and debonding hazard, they interpreted by their consequences that increasing of raggedness does non heighten the bond strength. The argument over the influence of raggedness is still an on-going issue and as such, the consequence of the raggedness of the concrete surface over adhesion procedure is non really clear ( Austin et al, 1995 ; Czarnecki, et Al, 2003 ) . Some research workers have argued that there is influence of surface sums on the degree of adhesion that take topographic point at the interface. A seeable sum of ratios between 30 to forty per centums provided better consequences ( Fiebrich, 1994 ) . Fukuzawa et Al ( 2001 ) , argued the being of correlativity between roughness parametric quantities of the material surface and the adhesion strength. Though the raggedness of the stuff is an of import factor, some writers ( Silfwerbrand, 1990 ) have besides pointed the affect of micro clefts that are produced on the surface of the concrete when the surface is treated by different methods to accomplish the raggedness. These sorts of micro clefts are found to deteriorate the quality of the bonds that is formed between the concretes ( Garbacz et al, 2005 ) .2.3.6 Influence of wet:With respects to the presence of wet, recent surveies provide a better apprehension to the subject of influence of the wet on the strength of the bond. Bouksani et Al ( 2010 ) , in their survey on the influence of the raggedness and wet of the substrate surface on the bond between the old and the new concrete, suggest that the incursion of the sheathing stuff into the substrate concrete is chiefly dependent on quality readying of the substrate surface. They besides suggested that the surface of the substrate should be saturated with dry surface- which means that the surface of the substrate is non stagnated with H2O, so that it ensures that a good micro raggedness and a better thermodynamic surface assimilation is achieved. They suggest that the stagnancy of the H2O on the substrate surface can forestall the pores from absorbing the sheathing stuff which can ensue in a weak adhesion procedure. The overall consequence of over stagnancy is that, it will stand as a barrier in the interface zone cut downing the attachment procedure. On the other manus if the substrate stuff surface is dry with really low wet or no wet, this will ensue in the interface absorbing more H2O from the freshly laid stuff. Such a procedure will besides cut down the overall adhesion procedure as this could ensue in higher opportunity of uncomplete hydration of the cement. Therefore, it can be concluded that the wet needs to be present merely to a optimal degree. Excessively much wet or excessively small presence of wet will ensue in a weak adhesion procedure. Similarly, Xu ( 1999 ) besides studied bond strength utilizing oven dry, air dry and concentrated surface dry status of substrate. He reported that prewetting the surface of concrete substrate reduced the bond strength of the specimens used in his experiment from 0.64 to 0.12 MPa However, Saucier and Pigeon ( 1991 ) did n't happen any noteworthy difference between the bond strength of lab dried surface and pre-wetted surfaces in slant shear trial. In another survey, Austin et Al. ( 1995 ) did work on happening bond strength utilizing substrates with concentrated surface prohibitionist, saturated surface moisture and air dry wet conditions. They besides reported no important difference in bond strengths ( about 2.77 to 2.98 MPa ) due to the different wet status of substrate.2.3.7 Influence of Bring arounding Condition:There are a few researches carried out refering the affect of bring arounding status on the shear bond strength. Yee and Ibrahim ( 2010 ) in their survey on shear capacity of precast slabs investigated the difference in consequences for H2O cured samples and air cured samples. The consequences they got were changing with similar raggedness feature of surface but different bring arounding status. For case, a unsmooth surface produced higher shear capacity than a smooth one in air cured status whereas a smooth surface produced 16 to 18 % higher shear capacity in H2O cured conditions. Another noteworthy point was the influence of bring arounding status on the interface strength which was highly variable, as such it decreased by 30 % in smooth and unsmooth surface in H2O cured status where as for the air cured status it increased by 40 % between smooth and unsmooth surface.2.3.6 Influence of Bond Coat:It is common that some external agents are used in the mix to accomplish a higher degree of adhesion. Many writers have different sentiment sing this, chiefly the bond coats like polymer complexs. Some writers ( Silfwerbrand, 1998 ) argue that the bond coats can ensue in creative activity of an excess plane of failing. As a consequence, it has been advised to avo id the bond coats. Further, the bond coats could besides take to the decrease of the meshing consequence ensuing in an overall negative consequence ( Garbacz et al, 2005 ) . On the other manus these statements have been questioned by some other writers. Interestingly, harmonizing to some other writers ( Austin et al, 1995 ; Pretorius and Kruger, 2001 ) , the presence of the bond coats could increase the adhesion procedure between the two concretes. To this point, Garbacz et Al ( 2005 ) conducted a survey to look into the influence of surface intervention of the concretes on the adhesion mechanism between the concrete beds. Different surface intervention methods were used in order to accomplish different qualities of surface on the concrete stuff surface. Additionally, a fix howitzer with coat was applied to the old concrete and the adhesion was measured. The consequences showed that, in the instance of the sheathings applied without the bond coats, the adhesion procedure was influenced by the raggedness of the concrete substrate. Form this, it was concluded that the good bond strength belongingss can be achieved from the howitzer ( repair howitzer ) and the bond coat belongingss. It was further concluded that the belongingss of the bond coats and the howitzer helped in bridging the micro clefts and concrete pieces, and besides filled the surface abnormalities. Therefore, it can be concluded on the recent plants on influence of the surface on the adhesion between the surfaces the roughness status of the surface can be regarded as one of the contributing or act uponing factor in the fix of the concretes. From these treatments on the different factors impacting the bond it can be concluded that the consequences are non ever in consensus and there is still need for surveies to be carried out in this country for deriving farther penetration of the existent behavior of bond with regard to alterations in factors impacting it.2.4 Surface Roughening Technique:There are different ways in which the surface of the stuffs can be prepared to accomplish different raggedness conditions. However, the chief purpose of executing the surface intervention on the substrate is to the brand sure that the unwanted beds that might cut down the adhesion procedure are removed before the new beds of concretes are laid on to the surface. In add-on, this besides ensures that the entire country of surface contact is increased to the maximal degree. The forms and feelings achieved on the surface will depend upon the energy applied and chosen techniques. Roughening Techniques which does non deteriorate the mechanical unity of the substrate stuff must be used. It is of import to see the local status of the concrete under consideration. Consequently, common techniques like chisel and cocks, sandblasting, hydro-jetting, needle gunning, crunching or milling, hammering etc, may be used ( Garbacz et al, 2005 ) .2.4.2 Measurement of Roughness:The raggedness is by and large assessed qualitatively. But, placing the fact that this sort of raggedness rating leads to subjectiveness of consequences, there have been some efforts made to quantify the raggedness. For, case mechanical profilometry was used to distinguish polished and sandblasted concrete surfaces ( Courard 1998, Courard and Nelis 2003 & A ; Courard and Garbacz 2004 ) . Due to some defects of this procedure like viability with lone short surfaces etc. , another method of optical analysis was developed ( Perez et al 2003 ) in order to analyze big surfaces. Subsequently on, these two ab ove mentioned techniques were compared by Courard et Al ( 2006 ) and they concluded that with the combination of these two methods it is possible to acquire a really good description of â€Å" raggedness † at all graduated tables. They besides pointed out some restrictions of these methods sing the form of stylus which would do it impossible to take measurings on really unsmooth surfaces and other restrictions being really clip devouring etc. , In another survey by Courard et Al ( 2004 ) a point which is concluded is that a parametric quantity Xa which is the arithmetic mean of the going of the raggedness profile from the average line is the major discriminating parametric quantity for the comparing of surface readying techniques. In a new method for measuring the surface raggedness Abu Tair et Al ( 2000 ) , studied five different sorts of raggedness including needle gunning. They used a different attack for quantifying the raggedness by associating the sum of raggedness to Roughness Gradient of the raggedness profile obtained. They concluded that the raggedness gradient parametric quantity can give a proper indicant of the chapped surfaces. In this survey an effort is made to happen out a similar sort of parametric quantity to which the sum of raggedness can be related and the chapped surfaces can appropriately be categorized.

Elcano vs. Hill case

NATUREAppeal from an order of the CFI Quezon CityFACTSReginald Hill, a minor yet married at the time of occurrence, was criminally prosecuted for the killing of Agapito Elcano (son of Pedro), and was acquitted for ―lack of intent to kill, coupled with mistake.â€â€" – Pedro Elcano filed a complaint for recovery of damages from Reginald and his father Atty Marvin. CFI dismissed it.ISSUESWON the civil action for damages is barred by the acquittal of Reginald in the criminal case wherein the action for civil liability was not reversed2. WON Article 2180 (2nd and last par) of the CC can be applied against Atty. Hill, notwithstanding the fact that at the time of the occurrence, Reginald, though a minor, living with and getting subsistence from his father, was already legally married.HELD1. NOThe acquittal of Reginal Hill in the criminal case has not extinguished his liability forquasi-delict, hence that acquittal is not a bar to the instant action against him.  Ã¢â‚¬â€œÃ ‚  Barredo v Garcia  (dual character — civil and criminal—  of fault or negligence as a source of obligation):†The above case is pertinent because it shows that the same act may come under both the Penal Code and the Civil Code. In that case, the action of the agent was unjustified and fraudulent and therefore could have been the subject of a  criminal action. And yet, it was held to be also a proper subject of a civil action under article 1902 of the Civil Code.It is also to be noted that it was the employer and not the employee who was being sued.†Ã¢â‚¬ It will be noticed that the defendant in the above case could have been prosecuted in a criminal case because his negligence causing the death of the child was punishable by the Penal Code.Here is therefore a clear instance of the same act of negligence being aproper subject matter either of a criminal action with its consequent civil liability arising from a crime or of an entirely separate and ind ependent civil action for fault or negligence under article 1402 of the Civil Code. Thus, in this jurisdiction, the separate individuality of a c quasi-delito  or culpa aquiliana under the Civil Code has been fully and clearly recognized, even with regard to a negligent act for which the wrongdoer could have been prosecuted and convicted in a criminal case aria for which, after un a conviction, he could have been sued for this civil liability arising from his crime.Culpa aquiliana  includes acts which are criminal in character or in violation of a penal law, whether voluntary or negligent.-ART 1162: â€Å"Obligations derived from quasi-delicts shall be governed by the provisions of Chapter 2, Title XVII of this Book, (on quasi-delicts) and by special laws.† More precisely, Article 2177 of the new code provides:†ART 277. Responsibility for fault or negligence under the preceding article is entirely separate and distinct from the civil liability arising front negligen ce under the Penal Code. But the plaintiff cannot recover damages twice for the same act or omission of the defendant.